|
1260-12
EADS (formerly Racal) |
Relay Actuator Module
Ideal for general purpose
switching and control of external devices, Each channel switches up to
2A and 220 VDC or 250 VACrms, Easily configured to meet user-defined
network requirements, Channels switched jointly or independently,
Configured as 20 Channels of DPDT Relays |
Download Datasheet |
|
1260-13
EADS (formerly Racal) |
Signal Switch / Relay
Actuator Module
Ideal for general purpose
switching and control of external devices, Each channel switches up to
2A and 220 VDC or 250 VACrms, Easily configured to meet user-defined
network requirements, Channels switched jointly or independently,
Configured as 40 Channels of DPDT Relays |
Download Datasheet |
|
1260-14
EADS (formerly Racal) |
Digital I/O Module
96 TTL, CMOS or
open-collector input/output channels, Drives up to 32 V and sinks up to
200 mA per channel, Two-wire programmable handshaking, Synchronous,
Asynchronous and mixed operating modes, 200 kHz data rate, Single-slot,
C-size, message-based VIXbus module |
Download Datasheet |
|
1260-16
EADS (formerly Racal) |
Relay Actuator Module
Ideal for general purpose
switching and control of external devices, Each channel switches up to
5A and 30 VDC or 250 VACrms, Individual relays can be easily configured
to meet user-defined network requirements, High density, configured as
40 channels independent SPDT switches |
Download Datasheet |
|
1260-17
EADS (formerly Racal) |
High Density Switch Module
Ideal for general purpose
switching, Switches signals up to 1 A and 250 VDC or VACrms, Easily
configured to meet user defined network requirements, Extremely
high=density module - 80 SPDT switches |
Download Datasheet |
|
1260-18
EADS (formerly Racal) |
Basic High Density Switch
Module
152 Channels of SPST
switches, 50 MHz bandwidth minimum - 100 MHz bandwidth typical, Switches
signals up to 1 Amps or 250 VAC, High density user configurable
switching, Both "include" and "exclude" programmable switching, Combine
several switch needs on a single card |
Download Datasheet |
|
1260-20
EADS (formerly Racal) |
Power Switch Module
Provides switching for AC or
DC power supplies and current sources, Power switch networks may be
configured from 20 independent DPST relays, Switches up to 8 Amps at 250
VACrms or 5 Amps at 48 VDC, Carry current up to 10 Amps, Configured as
20 DPST relays |
Download Datasheet |
|
1260-20B
EADS (formerly Racal) |
Power Switch Module
Provides switching for AC or
DC power supplies and current sources, Power switch networks may be
configured from 20 independent DPST relays, Switches up to 8 Amps at 250
VACrms or 5 Amps at 48 VDC, Carry current up to 10 Amps |
Download Datasheet |
|
1260-22
EADS (formerly Racal) |
High Power Switch Card
40 Channels of SPST
high-power switching, Switching for power supplies and current sources,
Switches up to 20 A, AC or DC, Interface for external "emergency reset"
switch to open all channels, Reconfigurable as multiplexer: Five 4x1
plus Ten 2x1, Provisions for adding shunt contact protection elements |
Download Datasheet |
|
1260-30
EADS (formerly Racal) |
Multiplexer Module
Two-wire network, 10 MHz
bandwidth, Switches up to 2A and 250 V, High power multiplexer, Option
to add terminations |
Download Datasheet |
|
1260-35
EADS (formerly Racal) |
High Density
Scanner/Multiplexer Module
High-density switching in a
single slot, 50 MHz bandwidth, Low thermal offset, User configurable, 1
x 192 1-wire module |
Download Datasheet |
|
1260-37
EADS (formerly Racal) |
Combination SPDT/Multiplexer
Module
Ideal for general purpose
switching and multiplexing, Switches signals up to 1A and 250 VDC or
ACrms, Easily configured to meet user-defined network requirements |
Download Datasheet |
|
1260-38
EADS (formerly Racal) |
High Density Multiplexer
Module
Configurable as any of the
following combinations: sixteen 1x8 multiplexers, 2-wire, eight 1x8
multiplexers, 4-wire, eight 1x16 multiplexers, 2-wire, eight 1x32
multiplexers, 1-wire, one 1x64 multiplexer, 4-wire, one 1x128
multiplexer, 2-wire, one 1x256 multiplexer, 1-wire, 30 MHz bandwidth,
Switches signals up to 2 Amps or 250 VAC |
Download Datasheet |
|
1260-38T
EADS (formerly Racal) |
High Density Multiplexer
Module
Sixteen 1x8 two-wire
scanner/multiplexer, Link muxes up to 1x128 under program control, 30
MHz bandwidth, Switches up to 2A and 220VDC/250VAC, Two and four-wire
switching modes, High isolation/Low crosstalk design |
Download Datasheet |
|
1260-39
EADS (formerly Racal) |
Multi-Purpose Switch Card
Five switch configurations
in a C-size, single-slot, VXIbus module, 48 SPST, 50 MHz, 2A general
purpose relays, 6 (1x2), 50 MHz, 2A, 1-wire multiplexers, 3 (1x4), 40
MHz, 2A, 1-wire multiplexers, 5 (2x8), 40 MHz, 2A, 1-wire matrices, 5
DPST, 10 A power relays |
Download Datasheet |
|
1260-40
EADS (formerly Racal) |
Matrix Switch Module
10 MHz bandwidth, True
Matrix, Switches signals up to 1 A and 250 V, Non-latching relays (open
when power is lost) |
Download Datasheet |
|
1260-45
EADS (formerly Racal) |
High Density Switch Matrix
Module
Latching relays, 25 MHz
bandwidth, Switches signals up to 1 A and 250V |
Download Datasheet |
|
1260-50
EADS (formerly Racal) |
200 MHz RF Multiplexer
Module
Single-slot, C-Size,
message-based VXIbus module, 200 MHz bandwidth, Excellent crosstalk and
isolation, Software configurable, Coaxial interfaces |
Download Datasheet |
|
1260-51
EADS (formerly Racal) |
400 MHz RF Matrix
Configurable as 2x6, 2x12 or
2x36 RF Matrix, 400 MHz bandwidth, Software configurable - no jumpers,
Switches 30 Watts, 0.5 Amps and 125 VAC, High density coaxial
interfaces, Excellent for oscilloscope or time interval counter
measurements |
Download Datasheet |
|
1260-54
EADS (formerly Racal) |
1.3 GHz RF Multiplexer
Module
Configured as six 1x4 tree
multiplexers, Excellent crosstalk, isolation and VSWR performance to 1.3
GHz, Low noise performance supports switching of low-level RF signals,
Ideal for VHF/UHF matrix building block, Optional termination of input
signals |
Download Datasheet |
|
1260-58
EADS (formerly Racal) |
1 GHz RF Switch Module
Four 1x8 coaxial trees, >1
GHz bandwidth, Excellent crosstalk and isolation characteristics,
Single-slot, C-size, VXIbus module, High-quality 50 Ohm SMB coaxial
interface connectors, Ideal for switching high-frequency signals in ATE
systems |
Download Datasheet |
|
1260-59
EADS (formerly Racal) |
4 GHz RF Switch Module
4 or 8 1P4T high performance
RF signal paths, 4 GHz minimum bandwidth, 5 GHz typical, Single-slot,
C-size, message-based VXIbus module, Excellent insertion loss, Crosstalk
and isolation properties, Software configurable with VXI Plug & Play
drivers, High quality SMB coaxial interface connectors |
Download Datasheet |
|
1260-60
EADS (formerly Racal) |
Microwave Switch Module
DC to 18 GHz, Three SPDT, 50
Ohm Coaxial switches, External 50 Ohm terminations, Direct SMA Front
Panel Connections, An additional 24 SPST relays to drive external
devices |
Download Datasheet |
|
1260-64
EADS (formerly Racal) |
Microwave Switch Module
Double-slot, C-size,
message-based VXIbus module, DC to 18 GHz, Up to four SP6T, 50 Ohm
coaxial switches, Direct SMA front panel connections, An additional 32
SPST relays to drive external devices |
Download Datasheet |
|
1260-66
EADS (formerly Racal) |
Microwave Switch Module
High density microwave
switch, Double-slot, C-size, message-based VXIbus module, DC to 18 GHz,
Provides Ultra high density for RF and microwave switching requirements,
2, 4 or 6 SP6T, 50 Ohm coaxial switches, Direct SMA front panel
connections |
Download Datasheet |
|
1260-67
EADS (formerly Racal) |
High-Performance Microwave
Switch Module
Ideal for switching
cellular, PCS, and military communications signals, Bandwidth greater
than 18 GHz, Up to six 1x6 relays in a single C-size VXIbus slot,
High-quality Narda relays, Self-cleaning relays for high repeatability
and accurate system calibration, Relays replaceable from the front panel
in under 5 minutes |
Download Datasheet |
|
1260-75
EADS (formerly Racal) |
100 MHz RF Multiplexer
Module
100 MHz bandwidth, useable
to over 200 MHz, Excellent crosstalk and isolation, Software
configurable, Coaxial interfaces |
Download Datasheet |
|
1260-93
EADS (formerly Racal) |
100 MHz RF Multiplexer
Module
100 MHz bandwidth, useable
to over 200 MHz, Excellent crosstalk and isolation, Software
configurable, Coaxial interfaces, Two 1x19, One 1x39 or Two 1x39, One
1x79 |
Download Datasheet |
