|
1260-100
EADS (formerly Racal) |
Adapt-a-Switch VXIbus
Switch Carrier
|
|
|
1260-111
EADS (formerly Racal) |
High-Power Reed Form A/B
Plug-In
Twelve Form A and Twelve
Form B independent Dry-reed relays, Up to one million operations at
full-rated load, Switches up to 1000 VDC/VAC (pk-pk), Carry or
Hot-switch 2 Amps and up to 60 W, Ideal for high-voltage/current/density
switching systems, Standard Adapt-A-Switch Plug-in designed for ease of
replacement |
Download Datasheet |
|
1260-112
EADS (formerly Racal) |
High Density DPDT Switch
Plug-In
Ideal for switching digital
communication signals, Ideal for switching differential analog
communication signals, 120 MHz bandwidth, Ideal for general-purpose
high-performance signal routing, High density, Plug-in design for rapid
expansion and replacement |
Download Datasheet |
|
1260-114
EADS (formerly Racal) |
High Density Digital
Plug-In I/O Module
96 TTL, CMOS or
Open-collector input/output channels or 48 high voltage/current
open-collector input/output channels, Two-wire programmable handshaking,
200 kHz data rate, Drives up to 50 V and sinks up to 1.5A per channel,
Synchronous, Asynchronous and mixed operating modes, Standard
adapt-a-switch plug-in design for ease of replacement |
Download Datasheet |
|
1260-116
EADS (formerly Racal) |
High Density 5A SPDT
Plug-in Switch Card
High density, 24 SPDT (Form
C) Channels, Each channel switches up to 5A at 300 VDC or 250VAC,
Individual relays can easily be configured to meet user-defined network
requirements, Ideal for general purpose switching and control of
external devices, Plug-in design for rapid expansion and replacement |
Download Datasheet |
|
1260-117
EADS (formerly Racal) |
High Density Plug-In
Switch
52 Channels of SPDT
Switching, Ideal for general purpose switching to 60 MHz, Switches up to
2A, 220 VDC, or 250 VAC, Easily configured to meet user-defined network
requirements, EMI/RFI shields between plug-ins, Standard Adapt-a-Switch
plug-in design for ease of replacement |
Download Datasheet |
|
1260-118
EADS (formerly Racal) |
High Density Plug-In
Switch Card
80 Channels of SPST
switching, 100 MHz bandwidth (-3 dB), Switches up to 2A, 220 VDC, or 250
VAC, Meets several switch requirements with a single card, Standard
adapt-a-switch plut-in design for ease of replacement |
Download Datasheet |
|
1260-120
EADS (formerly Racal) |
Power Switch Plug-In
Module
20 Channels of SPST
high-power switching, Ideal for switching AC or DC power, Switches up to
13 A, Interface for external "emergency reset" switch to open all
channels, Standard adapt-a-switch plug-in design for ease of replacement |
Download Datasheet |
|
1260-121
EADS (formerly Racal) |
Power Switch Plug-in
Module
12 Channels of SPST
switches, AC to DC power switching, Terminal block or connector
interface, 13 ACC switching capability, "Emergency reset" panel
interface, Power-switching networks configured form 12 channels |
Download Datasheet |
|
1260-131
EADS (formerly Racal) |
High Density Multiplexer
Plug-In
Twenty six SP4T's, 200 MHz
bandwidth, Switches up to 2A, 220 VDC or 250 VAC, Standard
adapt-a-switch plug-in designed for ease of replacement, Ideal for
single-ended audio, video, telecom or general purpose switching |
Download Datasheet |
|
1260-132
EADS (formerly Racal) |
High-Power Reed
Multiplexer Plug-In
T1x23 Two-wire, dry reed
relay multiplexer, Switches up to 1000 VDC/VAC (pk-pk), Carry or hot
switch 2 Amps, Ideal for high-voltage/current switching up to 60 W,
Standard adapt-a-switch plug-in designed for ease of replacement, One
million operations at full-rated load. |
Download Datasheet |
|
1260-134
EADS (formerly Racal) |
High Density Multiplexer
Plug-In
Sixteen 1x4 Multiplexers,
100 MHz bandwidth, Switches up to 2 A, 220 VDC or 250 VAC, Standard
adapt-a-switch plug-in designed for ease of replacement |
Download Datasheet |
|
1260-136
EADS (formerly Racal) |
High Voltage Multiplexer
Plug-In Card
Ideal for Hipot and cable
breakdown testing, Ideal for switching source-measure units and
high-voltage power supplies in ATE, High density - up to 1x42 on a
dingle plug-in, Software configurable switch modes simplify test
development, Three relay versions available to support a wide range of
requirements, Plug-in design for rapid expansion and replacement |
Download Datasheet |
|
1260-138
EADS (formerly Racal) |
High Density Relay
Multiplexer Plug-In Card
Eight 1x8, Two-wire
scanner/multiplexer, Link 1x8 cells under program control, Link up to 6
Plug-ins under program control, True differential design ideal for
telecom and datacom applications, Two and four-wire switching modes,
Plug-in design for rapid expansion and replacement |
Download Datasheet |
|
1260-145
EADS (formerly Racal) |
High Density Switch Matrix
Plug-In
Seven standard versions with
up to 144 crosspoints, Each version separately characterized for
performance, Ideal for differential applications, Plug-in design for
rapid expansion and replacement, Analog bus for construction or large
matrices, Relay subassemblies lower spares and repair costs |
Download Datasheet |
|
1260-150
EADS (formerly Racal) |
RF Multiplexer Plug-In
Card
Ten 1x4 switch trees, 500
MHz bandwidth, Excellent crosstalk and isolation, 50 Ohm coaxial
interfaces, Standard adapt-a-switch plug-in design for ease of
replacement. |
Download Datasheet |
|
1260-152
EADS (formerly Racal) |
High Frequency Coaxial
Plug-in Switch Card
1.2 GHz Bandwidth, 50 Ohm,
Coaxial interface, 17 channels of SPDT switches, Ideal for
high-frequency RF switching. |
Download Datasheet |
|
1260-172
EADS (formerly Racal) |
High Frequency Coaxial
Plug-in Switch Card
900 MHz Bandwidth, 75 Ohm,
Coaxial interface, 17 channels of SPDT switches, Ideal for
high-frequency RF switching. |
Download Datasheet |
|
1260-155
EADS (formerly Racal) |
3 GHz 1x4 Coaxial Tree
Switch Card
Can be used on both
GPIB/RS-232/Ethernet and VXI Platforms, Coaxial Interface, Available
with self-termination and 1.5 GHz or 3 GHz bandwidth, 50 Ohm
characteristic impedance; 75 Ohm impedance available, Ideal for general
purpose RF switching, No unterminated stub effects, Excellent isolation
and crosstalk characteristics. |
Download Datasheet |
|
1260-160
EADS (formerly Racal) |
High Performance Microwave
SPDT Plug-In Switch Card
DC to 18 GHz frequency
range, 1 and 2 slot plug-ins, Extremely long-life relays; 5 million
operations, MTTR of 5 minutes, Ideal for switching cellular, PCS< and
military communications signals. |
Download Datasheet |
|
1260-162
EADS (formerly Racal) |
High Performance Microwave
Transfer Switch Plug-In
Transfer switch
configuration, 2-slot plug-in, DC to 18 GHz frequency range, MTTR under
five minutes, High quality Narda switches, Self-cleaning switches for
high repeatability and accurate system calibration, Ideal for switching
cellular, PCSm and military communications signals. |
Download Datasheet |
|
1260-164
EADS (formerly Racal) |
High Performance SP4T
Microwave Switch Plug-In
SP4T configuration, 2-slot
plug-in, DC to 18 GHz frequency range, MTTR under five minutes, High
quality Narda switches, Self-cleaning switches for high repeatability
and accurate system calibration, Ideal for switching cellular, PCS< and
military communications signals. |
Download Datasheet |
|
1260-167
EADS (formerly Racal) |
High Density Microwave
Switch Plug-In
Ideal for switching
cellular, PCS, and military communications signals, Self-cleaning relays
for high repeatability and accurate system calibration, >18 GHz
bandwidth (26 GHz typical), Relays replaceable in under 5 minutes,
High-reliability relays: >1,000,000 operations. |
Download Datasheet |
|
1260-700
EADS (formerly Racal) |
Prototyping I/O Plug-In
Module
88 TTL I/O lines usable as
either digital inputs or outputs, Two-piece "open architecture" design
allows the creation of user plug-ins, Prototying kit allows
breadboarding of custom designs, 20 kHz VXI data rate, Synchronous,
Asynchronous and mixed operating modes with 2-wire programmable
handshaking, Adapt-a-switch plug-in design for VXIbus or GPIB operation. |
Download Datasheet |
